Scalers - Rammer 555 Scaler
Rammer has always been at the forefront of hammer development, and the 555 scaler is just a part of the next phase in hammer development for special applications, such as scaling.
Scaling is an extremely tough job for the hammer, and only a specialized scaling hammer should be used.
Features
- Single lower tool bushing
- Membrane type accumulator
- Twin-handed
- Sound supressed
- Ramlube I (Optional)
- No tie rods
- CBE+ (Constant blow energy plus)
Applications
- Scaling
Specifications
Weight | 228 kg | 500 lb |
Working length | 1261 mm | 49.6 in |
Minimum working weight, flange mounted *1 | 275 kg | 610 lb |
Impact rate (frequency) | 600 - 1800 bpm | |
Operating pressure | 80 - 130 bar | 1160 - 1885 psi |
Pressure relief min *2 | 130 - 180 bar | 1885 - 2610 psi |
Pressure relief max | 220 bar | 3190 psi |
Pressure in LP-circuit | 30 - 32 bar | 435 - 465 psi |
Oil flow range | 36 - 90 l/min | 9.2 - 23.8 gal/min |
Back pressure max | 20 bar | 290 psi |
Input power | 19.5 kW | 26 hp |
Tool diameter | 72 mm | 2.83 in |
Pressure line connection (IN) | BSPP-internal 3/4" | |
Return line connection (OUT) | BSPP-internal 3/4" | |
Pressure line size *3 | 19 mm | 0.75 in |
Return line size *3 | 19 mm | 0.75 in |
Grease connection | UNF 11/16-16-external | |
Air connection (A) | UNF 11/16-16-external | |
Water connection | UNF 11/16-16-external | |
Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
Allowed viscosity range | 20 - 1000 cSt | |
Miniexcavator, tractor backhoe weight, Optium | 3.6 - 5.8 t | 7900 - 12800 lb |
Miniexcavator, tractor backhoe weight, Range *4 | 3.2 - 8.0 t | 7050 - 17600 lb |
Skid steer, robot weight, optimum | 2.4 - 3.9 t | 5290 - 8600 lb |
Skid steer, robot weight, range *5 | 1.9 - 5.3 t | 4200 - 11680 lb |
Noise level, measured (2000/14/EC) | 118 dB(A) | |
Noise level, guaranteed (2000/14/EC) | 122 dB(A) | |
*1 Includes average mounting bracket and standard tool *2 Minimun setting = actual operating pressure + 50 bar or 725 psi *3 minimum inner diameter *4 Check carrier's lifting capacity from carrier manufacturer *5 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements. |