ALLU Material Processing Buckets – Mining and Quarrying
Reducing material double-handling
The ALLU Transformer M-series material processing buckets transform the carrier into a high-capacity mobile crusher or screener by crushing the material, separating hard unwanted impurities in the rock mass, while loading the dump truck or conveyor system. Crushing and loading the raw material is completed in one step reducing the need of buffer storage areas and material transportation.
ALLU M-series suit excavators from 50 to 160t.
Effectively crush and recycle troublesome materials
The heavy-duty range of ALLU Crusher Buckets have been purpose designed to meet the requirements of the quarrying, demolition and recycling industries. Whilst the ALLU Transformer range offers unique productivity and efficiency benefits on soft rock and other materials, the ALLU Crusher range enables hard rock, and often troublesome demolition materials, to be effectively reduced onsite and less material sent to landfill.
ALLU Crushers suit excavators from 10 to 38t.
Productivity
Simultaneous processing and loading with one carrier. Reduced number of process steps will save you time and increase your bottom line.
Efficiency
Screening and loading solution capable of handling all materials from wet soils to coal and rock. Reduced need for buffer storage areas and transportation of material heaps that are clogged due to moisture or contamination.
Performance
ALLU Tracker measures performance and tracks equipment in the field. ALLU Tracker stores information on processing time, total working time and processed tonnes and can be viewed and analysed via an easy-to-use dashboard.
Machine to Material
Apart from their diversity, Transformer buckets offer the most portable processing solution available – they allow the machine to go to the pile, the pile no longer needs to be hauled to the machine. This creates significant transport cost savings as haul trucks are not required to bring material to the processing plant and there is no need for an additional excavator to load the hauled material into a fixed crusher.
Such mobility also permits a machine fitted with the Transformer attachment to be quickly and easily transported via low-loader to a satellite location, or even a different site, where it can be put into production immediately. Again, this eliminates the necessity for a separate remote plant and associated wiring and infrastructure.
ALLU M-series
ALLU M-series screen, crush and load raw material in a single step. The main applications are:
- soft rock quarrying
- mineral excavation and mining
- sand and gravel production
- material processing and loading
Oil shale, coal, limestone processing, and/or any soft rock crushing is completed with ALLU Transformer M-series screener crusher efficiently.
ALLU M-series suit excavators from 50 to 160t.
See the links below for features and specifications:
ALLU AC Crusher-series
ALLU Crusher is a hydraulic crushing attachment that has been designed to effectively crush and recycle demolition materials, building rubble, natural stones, asphalt materials, concrete, and construction debris. The main applications are:
- waste rock handling at quarries
- concrete waste and asphalt recycling
- demolition and construction
- bricks, ceramics etc crushing & recycling
The AC series for excavators includes 5 different models to suit excavators from 8 to 38t.
See the links below for features and specifications:
One ALLU – 3 Fragment Sizes
ALLU TS structure enables three different fragment sizes from the same unit. Fragment size estimation is based on the distance set by the screening comb.
The ALLU TS structure blade setup is quick and easy to change onsite allowing you to adapt the ALLU bucket for specific screening needs and making it easy to move from one screening job to another.
Due to the TS®’s self-cleaning design the best possible capacity is enabled even with wet materials. This is called as a non-clogging structure and it is available across entire TS range.
SINGLE BLADE
Single blade setup: blade sizes 8mm, 16mm, 25mm, 35mm.
DOUBLE BLADE
Double blade setup: blade sizes 16mm, 32mm, 50mm, 70mm.
TRIPLE BLADE
Triple blade setup: blade sizes 24mm, 48mm, 75mm, 105mm.
How does ALLU work?
ALLU has an unique design for bulk and mining materials handling.
- Screening and loading material
- Screening and crushing material
- Crushing soft rock material
- Re-crushing segregated material
Data Acquisition – ALLU tracker
ALLU Tracker
Processing data is of huge value to production and financial personnel and the ALLU Transformer buckets tick that box too.
Processing data is of huge value to production and financial personnel and the ALLU Transformer buckets tick that box too.
Using ALLU Tracker system, information such as:
- processed tonnes,
- bucket count,
- processing time,
- total working time,
- down time,
- cycle time and
- even hydraulic temperature
can be recorded and viewed via an easy-to-use dashboard.
The ALLU Tracker notifies about the need for maintenance or replacement of wear parts to help you minimize downtime.
By obtaining accurate and timely information on the actual throughput of the attachment help manage production schedules, estimate project finish times and provide new project quotes, just as it would be from a fixed plant.
Enquire Now