SIMEX Wheels Saws for fixed-section trenching
Intended for skid steer mounting, Simex Trenching Wheels (wheel saws) are ideal for the works requiring cutting small sections of trenches on hard or compacted surfaces, including asphalt, concrete and rock.
Simex range of Trenching Wheels come with high level of visibility, wheel protection at all depths and hydraulic piston motors with direct wheel drive provide you with safety and high performance.
Simex Trenching Wheels are available in a range of models that reach a maximum trench width of 250mm and depth of 800mm.
Key Specifications
Operating weight
270 – 1,430 kg
Trench depth
200 – 800 mm
Oil Flow Range
from 35 – 170 l/min
Features and Benefits
- CLEAN TRENCH: The trench clearing device is a blade that is hydraulically activated to enter the trench during excavation; it makes sure the trench is clean and emptied in preparation for utilities installation.
- MATERIAL DISCHARGE: Discharged material, which can be reused later to backfill the trench, is normally expelled to the right and left. One of the discharge outlets can be closed to allow discharge to one side only (useful for roadside trenching).
- WHEEL SECTORS: The disk has removable and interchangeable sectors to quickly adjust to the trench width while using the same base disk.
Applications
- Fixed-section trenching
- Cutting
- Micro-trenching
Specifications – Trenching Wheels
Model | T 200 | T 300 | TA 300 | T 450 | T 600 | T 800 |
Trench Width (mm) | 30 - 40 - 50 | 30 - 50 - 80 | 30 - 50 - 80 | 50 - 80 -100 - 130 - 160 - 200 | 80 -100 - 130 - 160 - 200 | 250 |
Trench Depth (mm) | 200 | 300 | 300 | 150 - 450 | 200 - 600 | 450 - 800 |
Depth adjustments | - | - | - | Hydraulic | Hydraulic | Hydraulic |
Side shift | Mechanical | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic |
Trench clearing device | - | on request | on request | on request | on request | - |
Conveyor belt | - | - | on request | on request | - | - |
Tilt - lateral tilt (degrees) | - | - | standard | - | - | - |
Segmented wheel | - | - | - | on request (T450S) | on request (T600S) | - |
Vacuum device | - | on request | on request | on request | on request | - |
Operating weight with standard wheel (1) (kg) | 270 | 665 | 845 | 1,115 | 1,340 | 1,430 |
Required oil flow (l/min) | 35 - 75 | 60 - 115 | 60 - 115 | 100 - 160 | 110 - 170 | 110 - 170 |
Max. oil pressure (bar) | 250 | 300 | 300 | 300 | 300 | 300 |
- (1) User is responsible for ensuring that the characteristics of the prime mover suit the weight and specifications of the attachment.
Specifications are subject to change without notice.